Olufemi Samuel Ogundele

Olufemi Samuel Ogundele

Olufemi Samuel Ogundele was born in Iyin-Ekiti, Ekiti state of Nigeria on the 8^th of April 1961 into the family of Mr. Ebenezer Oladele Ogundele and Mrs. Julianah Ojufun Ogundele.

Olufemi Samuel Ogundele grew up in Oshodi, Lagos state Nigeria. 

Schools Attended:

    Afolabi Institute Primary School, Oshodi, Lagos (1967 – 1972).

    Local Authority Secondary Commercial Modern School, Ikeja, (PWD), Lagos state. (1973/74).

    Ikeja Grammar School, Oshodi, Lagos state. (1974 – 1979). 

    Lagos State Polytechnic, Ketu campus (HSC) (1979).

    Yaba College of Technology, Yaba, Lagos (1980-1982 OND). 

     Yaba College of Technology, Yaba, Lagos (1983-1985 HND) 

      Federal University of Technology (MBA) (Not concluded – financial problem, victim of fraudstars just before the last semester’s examination) (2000-2001) 

    National Teachers Institute – PGD Education (2010) 

        Working Experience:

    Industrial training at Boulus Enterprises, Honda Motorcycle assembly Plant (1982/83)

    National Youth Service Corps at Kaduna, primary assignment at Peugeot Automobile Assembly Plant Kaduna. (1985/86)

    Metal Furniture Nigeria Ltd, Ikeja, Lagos – HOD, Design & Prototype Dept. (1986-1990)

    Micbam Nig. Ltd. – Project Engineer (July – Sept 1990)

    Nigerian Bottling Company (Coca-Cola) – Plant Engineer (1990-2001)

    Samdel Ventures – MD/CEO (2001-2007)

    Olu-Samdel Ventures Ltd – MD/CEO (2007-date)

    Dammic Model Schools – co-proprietor with wife. (2007-date)

Olufemi Samuel Ogundele while at Nigerian Bottling Company (bottling Coca-Cola products in Nigeria), worked as Plant Engineer and served at Aba, Sokoto, Apapa, Ikeja plant “B”, Mushin plant; had assignment in almost all the plants in the federation.

Olufemi Samuel Ogundele started an Equipment Design and Fabrication company – Samdel Ventures - after leaving NBC. The company became an in-house contractor for Dunlop Nigeria Plc. Designed and fabricated a lot of production process equipment. Mostly conveyors. Samdel ventures became a limited liability company by name Olu-Samdel Ventures Ltd in 2007. The company has fabricated lots of equipment: Yam pounding machine; Candle Making Machine; Poultry Battery Cages; Poultry Equipment; Concrete Pole Mould; The company will be introducing some of its equipment into the market soon: Yam Pounding Machine. Concrete pole moulding. Poultry Battery Cages. 

Olufemi Samuel Ogundele got married to Temilola Marian Ogundele (Nee Adedeji) and is blessed with four children.

    Damilola Esther Ogundele – graduate of Bio-chemistry from University of Ilorin.

    Michael Oladipupo Ogundele - Weapon Artificer Nigerian Navy.

    Adenike Ifedolapo Ogundele

    Damilare Ogundele

Olufemi Samuel Ogundele worshipped at All Saints’ Anglican Church Oshodi from 1966 till he left Oshodi for Sango in 1999. He was an Altar Server – serving in the altar during Holy Communion. At All Saints Church Oshodi, Olufemi Samuel Ogundele co-founded a Society the Christ Morning Star established in the year 1977, he was president 1988-1992. He now worships at Grace Deliverance Bible Ministries (inc) where he was robed a Deacon at the 10^th convention in November 2007. Ordained Pastor October 29th 2023.

Olufemi Samuel Ogundele was Chairman (2002-2010) of Orile-Iloye Community Development Association - a community where he resides from 1999 till date. During the tenure the community which had no electricity acquired two transformers – one 500kva/33kv/415v and one 300kva/33kv/415v. The community constructed concrete pole mould and mould about 300 concrete poles used throughout the community territory with aluminum conductors running over 75% of the network. The community land space was ratified from state of acquisition. The community however embarked on a transportation project which failed woefully. As at today the community is divided into 6 CDAs which still work together.

CONCRETE POLE MOLD

Get the right tool for the job.

Good mold produces good concrete poles.

Concrete Pole Moulds

HT Concrete Poles:-

        Length = 33ft = 10m

        Base = 310mm x 270mm

        Top  = 125mm x 125mm

LT Concrete Poles:-

        Length = 28ft = 8.4m

        Base size  = 280mm x 250mm

        Top size    = 125mm x 125mm

Base plates for concrete pole are made to suit the pole mould.

Necessary holes are put in place in the concrete pole mould.

The HT concrete pole moulds are made to be convertible, which means they can be used for either HT or LT concrete poles with little setting.

The customer can decide the type of bowl required short or long. While long ones save materials the short ones give more strength. Long ones are usually preferred by commercial clients.

Materials = 2mm m/s plate / 50 x 5mm thick angle

Calculate cost based on No of Mold and No of base plate.

Advise: Always consider 2 base to one mold. (see “how to”)

Contact: Olufemi Ogundele
7, Ogundele close, Orile-Iloye Sango, Ogun state, Nigeria.

234 8034730895 (WhatsApp) 234 8096061802.  olusamdel@yahoo.com

How to Use:

Concrete Pole Molds are fixed on base plates firmly as seen in the picture, after which concrete are poured. 

The concrete pole molds are loosened when the cast is set, which can be the following day or if the weather is right in the evening.

The concrete pole mold can then be used the next day on another base plate. Or same day, in the evening.

Therefore it is advisable for at least two base plates to be made per each pole mold set.

The molded pole is left on the base plate for 48hrs (2days) to be fully set before turned off.

Things you should know.

You need to determine the base size of your concrete pole as a pole maker, this depends on the sizes of concrete poles being produced or in use in your area. Some makers prefer the robust (310 x 270), while some prefer the slimmer (300 x 235). The slimmer it is the better for profit, but this could be judged as low quality when compared with other sizes in the market. The mold will be made to suit your need. Your concrete pole should be better than competitors’ while maintaining good profit.

A leveled ground is very important, especially when the concrete pole is off the base. If the ground is not level, the concrete pole will tend to take the shape of the floor while setting.

Adequate supply of water on the site is also very important. The concrete poles are watered frequently for about 21 days. Some even make a pool in which the poles are soaked for days after setting to give extra strength.

If order is much and time becomes an issue, then a heating chamber can be manufactured and trolley made for the base to give quick setting. With this more concrete poles can be made per day, concrete pole bases are more available and more quantities are sold off within shorter time.

Semi - automation or total automation is possible, after starting with manual, other necessary features shall be gradually put in place, if so desired.

we are designers and fabricators of equipment to suit your needs.

Tel: 234 8096061802, 8034730895 e-mail: autocad_design_ng@yahoo.com

Contact person: Olufemi Samuel Ogundele.

Our rates are affordable

It is good to make adequate preparation before commencing the project. Issues of space should be well planned for space is necessary for - pole moulding area, pole storage while setting, pole storage post-setting, pool of water, Bole hole and surface water tank..

Olu-Samdel Ventures Ltd
engineering design & services

POULTRY BATTERY CAGE

Poultry Battery Cages can be fabricated as

1.  Single tier battery cages single sided
2.  Single tier  battery cages double sided
3.  Two tier  battery cages single sided
4.  Two tier  battery cages double sided
5.  Three tiers  battery cages single sided
6.  Three tiers  battery cages double sided

      7.  Tiers more than three can be provided with either elevated platform or movable stand to allow attendant to reach to the higher tiers 

Battery cages can be slanted to allow for drops of manure directly to the floor. This type of cages are refered to as the "A" type.

Battery cages can also be straight, vertical design whereby manures are dropped in trays or tarpaulin, which are removable and cleanable; this type allows more cages in the poultry than the slanted type. This is refered to as the"H" type Cage.

To reduce the burden of cleaning, conveyors can be installed in place of tray, which are easily cleaned at the ends.

For those who intend to sell or make use of the manures on farms, Drying means can also be provided in form of air supply directly on to the wastes, getting rid of odor and drying them at the same time, this could be applied on trays or conveyors.

Position of feeder and drinkers on the battery cages can be adjusted to suit growing chicks.

Poultry Battery Cages can be for LAYERS, BROILERS, COCKERELS and other types of birds.

Poultry Battery Cages are provided in the following sizes:

1. 4 feet (1.2 m) length with 2 compartments
2. 6 feet (1.8 m) length with 3 compartments
3. 8 feet (2.4 m) length with 4 compartments

Each compartment is :- 

370mm(H) x 350mm(D) x 600mm(L). For layer's cage. 5 birds are assigned to a compartment.

400mm(H) x 700mm(D) x 1200mm(L). Open compartment For broiler's cage. Birds per compartment in the case of broiler is age dependent.

Custom sizes of battery cages can be built to suit space provided, but it is advisable that lengths more than eight feet be split into two or more unit to prevent sagging due to birds weight at the middle.

Eggs roll out easily from the battery cages for collection.

Drinkers and feeders for the battery cages are made of plastic with adjustable hangers.

Cost of battery cages are discussed when requirements are considered.

Pictures of battery cages can be sent to your mail box when contacted.

Contact us today:

Olu-Samdel Ventures Limited

7, Ogundele close, Orile-Iloye, Sango, Ogun-State.

e-mail - olusamdel@yahoo.com

Tel -  (234) 08096061802, 08034730895 (main number, call and WhatsApp)

AutoCAD Design In Nigeria

AutoCAD Designs In Nigeria Let Off The Big Drawing Boards. Use AutoCAD For Your Designs. I once worked in the design section of a metal furniture company. We had a big drawing office with big drawing boards and a lot of instruments to go with it. You spend hours sitting and sometimes standing to draft with pencil on paper. Then use drawing pen on tracing paper to give a more permanent drawing, which had to be taken out to a printing office to get copies. You make mistake or you work gets rough somehow, you may have to start your design or drawing all over again. It can be frustrating and time and attention demanding. Thanks to technology. Today the AutoCAD is here. You can do your drafting with less sweat, especially with the laptop, which you can take with you to the garden, under the tree, sitting room, bedroom, dining, office, even while travelling. As long as you save your work (design and drawings) it is there for you to see and improved upon all the time, that is AutoCAD for you. Gone are the days when you have to draw each view separately. Now, on AutoCAD just draw in 3D and any view you want is displayed for you automatically. Be it building, mechanical parts, equipment design, furniture, you’ve already gotten it. You don’t have to go far, you don’t need to set up a department for your drawings and designs if you do not have the work load or the where-with-all. We’ll take the burden off you – work on line with you, you do not need to leave your office. Or off-line – whichever you choose. Wherever you may be, we do not even need to see each other and your wish will be delivered at the touch of your computer. It is that simple. Tools required- phone, e-mail address and a computer at your end, you may not need to have an AutoCAD software as we transfer your drawing to a document you can open.  Contact: Olufemi Ogundele 7, Ogundele close, Orile-Iloye Sango, Ogun state, Nigeria. 234 8096061802, 8034730895 olusamdel@yahoo.com autocad_design_ng@yahoo.com  Olu-Samdel Ventures Ltd engineering design & services